Lexmark Z1520 User Manual Download Page 15

Page: 15 / 124

Use the

Wi-Fi indicator

Check wireless status:

•

Off

indicates that the printer is not turned on or that no wireless option is installed.

•

Orange

– indicates that the printer is ready to be configured for wireless printing

– indicates that the printer is connected for USB printing

•

Orange blinking

indicates that the printer is configured but is unable to

communicate with the wireless network.

•

Green

indicates that the printer is connected to a wireless network.

Paper exit tray

Stack paper as it exits.

Access cover

•

Install or change the print cartridges.

•

Clear paper jams.

Paper feed guard

Prevent items from falling into the paper slot.

Paper guides

Keep paper straight when feeding.

Paper support

Load paper.

Summary of Contents for Z1520





























































































































Search results

Summary of Contents for Z1520

Reviews:

Related manuals for Z1520

Brands by name

Popular brands

Lexmark Z1520, User Manual

Search results

Summary of Contents for Z1520

Reviews:

Related manuals for Z1520

Brands by name

Popular brands