Lexmark XM1342, User Manual

Page: 47 / 237

Using the Push Button method
1
From the home screen, touch Settings > Network/Ports > Wireless > Wi
‑
Fi Protected Setup > Start Push
Button Method .
2
Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the home screen, touch Settings > Network/Ports > Wireless > Wi
‑
Fi Protected Setup > Start PIN
Method .
2
Copy the eight
‑
digit WPS PIN.
3
Open a web browser, and then type the IP address of your access point in the address field.
Notes:
•
To know the IP address, see the documentation that came with your access point.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access point.
5
Enter the eight
‑
digit PIN, and then save the changes.
Configuring Wi
‑
Fi Direct
Wi-Fi Direct
®
is a Wi-Fi-based peer-to-peer technology that allows wireless devices to connect directly to a Wi-
Fi Direct
‑
enabled printer without using an access point (wireless router).
1
From the home screen, touch Settings > Network/Ports > Wi-Fi Direct .
2
Configure the settings.
•
Enable Wi
‑
Fi Direct —Enables the printer to broadcast its own Wi
‑
Fi Direct network.
•
Wi
‑
Fi Direct Name —Assigns a name for the Wi
‑
Fi Direct network.
•
Wi
‑
Fi Direct Password —Assigns the password for negotiating the wireless security when using the
peer
‑
to-peer connection.
•
Show Password on Setup Page —Shows the password on the Network Setup Page.
•
Auto-Accept Push Button Requests —Lets the printer accept connection requests automatically.
Note: Accepting push
‑
button requests automatically is not secured.
Notes:
•
By default, the Wi-Fi Direct network password is not visible on the printer display. To show the password,
enable the password peek icon. From the home screen, touch
Settings > Security > Miscellaneous >
Enable Password/PIN Reveal .
•
To know the password of the Wi-Fi Direct network without showing it on the printer display, from the
home screen touch
Settings > Reports > Network > Network Setup Page .
Set up, install, and configure 47