Lexmark XC9325 User Manual Download Page 112

Page: 112 / 438

Adjust the leveling screws to make sure that the tray has the same height with the printer.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see

“Adding available

options in the print driver” on page 76

Set up, install, and conﬁgure

112

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands