Lexmark XC9325 User Manual Download Page 225

Page: 225 / 438

Menu item

Description

User

‑

Initiated E

‑

mail

None*

Use Device SMTP Credentials

Use Session User ID and Password

Use Session E

‑

mail address and Password

Prompt user

Specify whether credentials are required for user

‑

initiated e

‑

mail.

Use Active Directory Device Credentials

Off*

Specify whether credentials are required for user

‑

initiated e

‑

mail.

Device Userid

Specify the user ID and password to connect to the SMTP server.

Device Password

Kerberos 5 REALM

Specify the realm for the Kerberos 5 authentication protocol.

NTLM Domain

Specify the domain name for the NTLM security protocol.

Disable “SMTP server not set up” error

Off*

Hide the “SMTP server not set up” error message.

Note:

An asterisk (*) next to a value indicates the factory default setting.

‑

mail Defaults

Menu item

Description

Subject:

Specify the e

‑

mail subject and message.

Message:

File Name

Specify the ﬁlename for the scanned document.

Format

JPEG (.jpg)

PDF (.pdf)*

TIFF (.tif)

XPS (.xps)

TXT (.txt)

RTF (.rtf)

DOCX (.docx)

CSV (.csv)

Specify the ﬁle format of the scanned document.

Note:

The menu items may vary depending on your printer model.

Global OCR Settings

Recognized Languages

Auto Rotate

Despeckle

Auto Contrast Enhance

Conﬁgure the settings for optical character recognition (OCR).

Note:

This menu item appears only if you have purchased and installed an OCR

solution.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

225

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands