Lexmark XC2130 User Manual Download Page 31

Page: 31 / 344

Push the card firmly into place as shown in the illustration.

Warning—Potential Damage:

Improper installation of the card may cause damage to the card and the

controller board.

Note:

The entire length of the connector on the card must touch and be flushed against the controller board.

Close the controller board access door.

Note:

When the printer software and any hardware options are installed, it may be necessary to manually add

the options in the printer driver to make them available for print jobs. For more information, see

“Adding

available options in the print driver” on page 35

Installing hardware options

Order of installation

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to lift it safely.

Additional printer setup

Summary of Contents for XC2130

























































































































































































































































































































































Search results

Summary of Contents for XC2130

Reviews:

Related manuals for XC2130

Brands by name

Popular brands

Lexmark XC2130, User Manual

Search results

Summary of Contents for XC2130

Reviews:

Related manuals for XC2130

Brands by name

Popular brands