Lexmark XC2130 User Manual Download Page 10 | Manualshive

Page: 10 / 344

background image

What are you looking for?

Find it here

The latest supplemental information, updates, and customer
support:

•

Documentation

•

Driver downloads

•

Live chat support

•

E

‑

mail support

•

Voice support

Lexmark support Web site—

http://support.lexmark.com

Note:

Select your country or region, and then select

your product to view the appropriate support site.

Support telephone numbers and hours of operation for
your country or region can be found on the support Web
site or on the printed warranty that came with your
printer.

Record the following information (located on the store
receipt and at the back of the printer), and have it ready
when you contact customer support so that they may
serve you faster:

•

Machine Type number

•

Serial number

•

Date purchased

•

Store where purchased

Warranty information

Warranty information varies by country or region:

•

In the U.S.

—See the Statement of Limited Warranty

included with this printer, or go to

http://support.lexmark.com

.

•

In other countries and regions

—See the printed

warranty that came with this printer.

Selecting a location for the printer

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to lift it safely.

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any
options, then leave enough room for them also. It is important to:

•

Set up the printer near a properly grounded and easily accessible electrical outlet.

•

Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee
156 standard.

•

Provide a flat, sturdy, and stable surface.

•

Keep the printer:

–

Clean, dry, and free of dust.

–

Away from stray staples and paper clips.

–

Away from the direct airflow of air conditioners, heaters, or ventilators.

–

Free from direct sunlight and humidity extremes.

•

Observe the recommended temperatures and avoid fluctuations:

Ambient temperature 15.6 to 32.2°C (60 to 90°F)

Storage temperature

-40 to 43°C (-40 to 110°F)

•

Allow the following recommended amount of space around the printer for proper ventilation:

Learning about the printer

10

«
...
8
9
10
11
12
...
»

Summary of Contents for XC2130

























































































































































































































































































































































Reviews:

No comments

Related manuals for XC2130

Brand: Xerox Pages: 34

Brand: Oki Pages: 17

Brand: Oki Pages: 12

Brand: Oki Pages: 30

Brand: Oki Pages: 391

Brand: Oki Pages: 2

DocuPrint C2200

Brand: Xerox Pages: 200

Brand: Compuprint Pages: 38

Brand: Oce Pages: 268

Brand: U-Line Pages: 33

Brand: Aficio Pages: 156

WorkCentre 6400XF

Brand: Xerox Pages: 24

Brand: Oki Pages: 157

Brand: DURACARD Pages: 31

Brand: Muratec Pages: 188

Brand: Muratec Pages: 364

Brand: EC-PACK Pages: 120

Brand: Panasonic Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands