Attaching cables
CAUTION—POTENTIAL INJURY:
Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a
lightning storm.
Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.
Make sure to match the following:
•
The USB symbol on the cable with the USB symbol on the printer
•
The appropriate Ethernet cable to the Ethernet port
Warning—Potential Damage:
Do not touch the USB cable, any network adapter, or the printer in the area shown
while actively printing. Loss of data or a malfunction can occur.
7
8
1
2
4
3
6
5
Use the
To
1
USB wireless port
Attach an optional wireless network adapter.
2
Security lock port
Lock the controller board.
3
Printer power cord
socket
Connect the printer to a properly grounded electrical outlet.
4
LINE port
Connect the printer to an active telephone line through a standard wall jack (RJ
‑
11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the telephone line
to send and receive faxes.
5
EXT port
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and if
this connection method is supported in your country or region.
Note:
Remove the adapter plug to access the port.
Additional printer setup
38
