manualshive.com logo in svg

Lexmark X646e MFP, Menus And Messages Manual

Share
Download
Lexmark X646e MFP Menus And Messages Manual Download Page 114

Attendance messages

114

Understanding MFP messages

39 Complex page, some 
data may not have 
printed

The data for a page is too complex to 
print.

To avoid this error in the future:

Reduce the complexity of the page by reducing 
the amount of text or graphics on the page and 
deleting unnecessary downloaded fonts or 
macros.

Set Page Protect to On in the Setup Menu in the 
Settings menu.

Install additional memory.

Touch 

Continue

 to continue printing the job; 

however, data will be missing for this page.

Touch 

Cancel Job 

to cancel the current job if 

needed.

Touch

 Reset Active Bin

 to change to another 

linked bin.

42.xy Cartridge region 
mismatch

x is the value of the printer region. y is 
the value of the cartridge region.

The message appears when the 
printer detects that an installed print 
cartridge has a region that differs 
from the printer region.

x and y can have the following values:

0: Worldwide region
1: Americas
2: EMEA
3: Asia
4: Latin America
9: Undefined region

Replace the print cartridge with one that has a 
proper region.

50 PPDS font error

The MFP has received a request for a 
font that is not installed when 
formatting PPDS print data.

Touch 

Continue

 to clear the message and 

continue printing the current job.

Touch 

Cancel Job 

to cancel the current job if 

needed.

Touch

 Reset Active Bin

 to change to another 

linked bin.

51 Defective flash 
detected

The MFP detects a defective flash 
memory during power-on or during 
flash format and write operations.

Touch 

Continue

 to clear the message and 

continue printing the current job.

At power-on reset, touch 

Continue

 to clear the 

message, and the MFP continues with normal 
operations except for flash operations.

Install different flash memory to be able to 
download any resources to flash.

52 Not enough free space 
in flash memory for 
resources

There is not enough space in the 
flash memory to store the data 
currently being downloaded.

Touch 

Continue

 to clear the message and 

continue the print job.

Install flash memory with more storage capacity.

Download the data.

Touch 

Cancel Job 

to

 

cancel the current job if 

needed.

Touch

 Reset Active Bin

 to change to another 

linked bin.

53 Unformatted flash 
detected

The MFP detects unformatted flash 
memory.

Touch 

Continue

 to clear the message and 

continue printing. The MFP continues with 
normal operations except for flash operations.

Reformat the flash to allow flash operations.

If the error message reappears, the flash 
memory may be defective and require replacing.

Message

Meaning

Action

Summary of Contents for X646e MFP








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands