manualshive.com logo in svg

Lexmark X646e MFP, Menus And Messages Manual

Share
Download
Lexmark X646e MFP Menus And Messages Manual Download Page 111

Attendance messages

111

Understanding MFP messages

Replace all originals if 
restarting job.

One or more messages that 
interrupted a scan job are now 
cleared. Replace the original 
documents in the scanner to restart 
the scan job.

Touch 

Restart job

 if 

job level recovery 

is active 

and the job is restartable. The message clears. 
A new scan job containing the same parameters 
as the previous job starts.

Touch 

Cancel Job

 if a scan job is processing 

when the attendance message appears. This 
cancels the job and clears the message.

Touch 

Scan from Automatic Document Feeder

 

if the page jam recovery is active. Scanning 
resumes from the ADF immediately after the 
last successfully scanned page.

Touch 

Scan from flatbed

 if page jam recovery is 

active. Scanning resumes from the flatbed 
immediately after the last successfully scanned 
page.

Touch 

Finish job without further scanning

 if 

page jam recovery is active. The job ends at the 
last successfully scanned page, but the job is 
not canceled. Successfully scanned pages go 
to their destination: copy, fax, e-mail, or FTP.

Replace jammed originals 
if restarting job.

One or more messages that 
interrupted a scan job are now 
cleared. Replace the original 
documents in the scanner to restart 
the scan job.

Touch 

Restart job

 if 

page level recovery

 is 

active and the job is restartable. The message 
clears. A new scan job containing the same 
parameters as the previous job starts.

Touch 

Cancel Job

 if a scan job is processing 

when the attendance message appears. This 
cancels the job and clears the message.

Touch 

Scan from Automatic Document Feeder

 

if the page jam recovery is active. Scanning 
resumes from the ADF immediately after the 
last successfully scanned page.

Touch 

Scan from flatbed

 if page jam recovery is 

active. Scanning resumes from the flatbed 
immediately after the last successfully scanned 
page.

Touch 

Finish job without further scanning

 if 

page jam recovery is active. The job ends at the 
last successfully scanned page, but the job is 
not canceled. Successfully scanned pages go 
to their destination: copy, fax, e-mail, or FTP.

Replace wiper

The MFP detects that the fuser wiper 
needs to be replaced.

1

Replace the fuser wiper. 

2

Touch 

Continue

 to clear the message.

Touch 

Ignore

 to clear the message, but at the 

next power-on, the message appears again.

Restore held jobs?

Held jobs are found on the hard disk 
after a power-on reset of the MFP. 

Touch 

Yes

 to restore the held jobs to the hard 

disk and make them available. The jobs data 
remains on the hard disk; however, the job 
control information is stored in the MFP 
memory. Touch 

Quit

 to stop restoring held jobs 

before all jobs are restored. Unrestored jobs 
remain on the hard disk and are retrievable 
again only at the next power-on reset.

Note:

A pop-up screen appears to indicate 

Restoring held jobs(s) xxx/yyy, where xxx 
indicates the number of the current job being 
restored, and yyy is the total number of jobs to 
be restored.

Touch 

Do not restore

 to have the held jobs 

remain on the hard disk until they are deleted.

Message

Meaning

Action

Summary of Contents for X646e MFP








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands