Attendance messages
113
Understanding MFP messages
34 Short paper
The length of the print media is too
short to print the formatted data.
Touch
Continue
to clear the message and
continue printing. The MFP does not
automatically reprint the page that prompted the
message.
Make sure the Paper Size setting in the Paper
Menu is correct for the size of print media used.
If MP Feeder Size is set to Universal, make sure
the print media is large enough for the formatted
data.
Touch
Cancel Job
to cancel the current job if
needed.
35 Insufficient memory
to support Resource Save
feature
The MFP lacks the memory needed
to enable Resource Save. This
message usually indicates too much
memory is allocated for one or more
of the MFP link buffers.
Touch
Continue
to disable Resource Save and
continue printing.
Install additional memory.
37 Insufficient memory
for Flash Memory
Defragment operation
The MFP cannot defragment flash
memory because the memory used to
store undeleted flash resources is full.
Touch
Continue
to clear the message.
To perform the defragment operation, install
additional memory, or delete fonts, macros, and
other data to free some memory space.
Touch
Reset Active Bin
to change to another
linked bin.
37 Insufficient memory
to collate job
The MFP cannot collate the job
because the memory is full.
Touch
Continue
to print the pages processed
before the memory became full. Some memory
frees up, so collating begins for the remainder of
the print job.
For example, if a 50-page print job is sent, and
10 copies are requested, and the MFP runs out
of memory at page 30, the MFP would collate
and print 10 copies of pages 1–30. The MFP
would then print and collate pages 31–50 and
print 10 copies of these pages.
37 Insufficient memory,
some Held Jobs were
deleted
Held jobs are deleted in order to
process the current job.
Touch
Continue
to clear the message and
continue printing.
To avoid this error in the future for other jobs,
install more memory.
Touch
Cancel Job
to cancel the current job if
needed.
37 Insufficient memory,
some held jobs will not
be restored
Printer memory depleted while
attempting to restore held jobs.
Touch
Continue
to clear the message. Some
held jobs are not restored. They stay on the
hard disk and are inaccessible.
38 Memory full
The MFP is processing data, but the
memory used to store pages is full.
To avoid this error in the future:
Simplify the print job by reducing the amount of
text or graphics on a page and deleting
unnecessary downloaded fonts or macros.
Install additional memory.
Touch
Cancel Job
to cancel the current job if
needed.
Touch
Reset Active Bin
to change to another
linked bin.
Message
Meaning
Action
