Button
Description
6
Tear Off
This alternates the paper between Tear Off and Top
‑
Of
‑
Form.
7
Start/Stop
This communicates the on or off status of the printer and places the printer in low power mode.
Power
Set TOF
LineFeed
Macro
Setup
Pitch
1
0
12
15
17
2
0
2
4
P
5
Lock
1
2
3
4
Micro
Micro
4
5
6
7
1
2
3
Layer 2 control panel buttons
Button
Description
1
LineFeed This advances the paper one line.
Note:
Press and hold
LineFeed
to advance the paper 5 micro movements, and then go into continuous
feed.
2
Macro
This supports different styles of pre
‑
printed forms and selects between four document formats.
3
Setup
This is used to enter Setup mode. This lets you change the default values and modes of printer operation.
4
Micro
This feeds the paper downward in small incremental movements.
Note:
Press and hold this button to select continuous feed.
5
Pitch
This sets the character pitch to: 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, or proportional spacing.
Notes:
•
On 2590+ or 2591+ models, you can also select 24 cpi.
•
Fast Draft supports only 10, 12, and 15 pitch.
Using the control panel
17
