manualshive.com logo in svg

Lexmark OptraImage 443, Service Manual

Share
Download
Lexmark OptraImage 443 Service Manual Download Page 57

4-13

4.4.4

4.4.4

4.4.4

4.4.4

 

ADF Cover Removal & Mounting

ADF Cover Removal & Mounting

ADF Cover Removal & Mounting

ADF Cover Removal & Mounting

As shown below, loosen the ADF cover fixing screws and remove the ADF cover to the
direction of the arrow.

              

Figure 4.15a  ADF Cover Removal

Figure 4.15a  ADF Cover Removal

Figure 4.15a  ADF Cover Removal

Figure 4.15a  ADF Cover Removal

To mount the ADF cover,

1.   Push the ADF unit backward.
2.   Take out the ADF cover and align the two clip-joints on the ADF unit as shown in Figure 4.15b.
3.   Fasten the fixing screws. (see Figure 4.15a)

Figure 4.15b  Check the photo-sensor’s arm after the ADF cover is mounted.

Figure 4.15b  Check the photo-sensor’s arm after the ADF cover is mounted.

Figure 4.15b  Check the photo-sensor’s arm after the ADF cover is mounted.

Figure 4.15b  Check the photo-sensor’s arm after the ADF cover is mounted.

Important!

Important!

Important!

Important!

After the ADF cover is mounted, move the sensor arm to make sure that moves freely.

Fixing Screws

Sensor Arm

Summary of Contents for OptraImage 443

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands