Lexmark Internal Use Only
2-4
2.4
2.4
2.4
2.4
Cable Connection
Cable Connection
Cable Connection
Cable Connection
Two cables are required to operate the scanner: the SCSI signal cable and the power cable. The
power cable connects the scanner to the power source. The SCSI signal cable connects the scanner to the
host for image transfer.
2.4.1
2.4.1
2.4.1
2.4.1
Power Cable Connection
Power Cable Connection
Power Cable Connection
Power Cable Connection
1.
Remove the power cable from the PVC bag.
2.
Turn the power switch to the “off” position (“0” depressed).
3.
Connect the female plug of the power cable to the scanner connector, and press it firmly into place.
(See Figure 2.4)
4.
Connect the other end of the power cable to the power outlet, and press it firmly into place.
Figure 2.4 Cable connection
Figure 2.4 Cable connection
Figure 2.4 Cable connection
Figure 2.4 Cable connection
Power Jack
SCSI Port
Summary of Contents for OptraImage 443
