68
5.2.2 Setting the MarkNet S Job Timeout
The recommended setting for the MarkNet S Job Timeout is 0 (disabled). This allows
the host system "release timer" value and the printer
IPDS Timeout
value to control
when print jobs from another protocol, interface, server, or host can be started.
You may set the MarkNet S Job Timeout value to a value greater than the host "release
timer" value. Errors are very likely to occur when the printer requires user intervention
and the intervention is not cleared before the timeout occurs.
Setting the MarkNet S Job Timeout smaller than the host "release timer" value or the
printer
IPDS Timeout
value will result in communication errors after the job has
printed.
From the printer operator panel, do the following:
1.
Press
Menu>
until the
NETWORK MENU
displays. Press
Select
.
2.
Press
Menu>
until the
NETWORK OPTION 1
displays. Press
Select
.
(This example assumes the MarkNet S Adapter is installed in option
connector 1.)
3.
Press
Menu>
until you see
NETWORK 1 SETUP
. Press
Select
.
4.
Press
Menu>
until you see
NETWORK CARD
. Press
Select
.
Here you find the following setting:
Job Timeout
0
(A setting of 0 allows the host system timer or the printer
IPDS Timeout
value to
control when print jobs from another protocol, interface, server or host can be started.)
