107
6.5 Verifying the Coax Interface with the SIMM
for IPDS
To verify the SCS adapter configuration, print a
SCS IDB dump
page. Follow these
steps:
1.
Press
Menu>
until
NETWORK MENU
displays. Press
Select
.
2.
Press
Menu>
until
NETWORK OPTION 1
displays. Press
Select
. (This
example assumes the SCS Adapter is installed in option connector 1.)
3.
Press
Menu>
until
SCS MENU 1
displays. Press
Select
.
4.
Press
Menu>
until you see
TEST OPTIONS
. Press
Select
.
5.
Press
Menu>
until you see
SCS IDB DUMP
.
Press
Select
.
6.
Press
Menu>
until you see
.
Press
Select
.
The printer returns to
Ready
when the IDB Dump has been printed.
The SCS IDB dump contains all the current adapter settings including the IPDS
Enabled setting and the current SCS adapter firmware level. Look for the sentence near
the top of the page telling you whether IPDS is active or not active.
Additional Information
Please refer to the
Intermate A/T
Optra S, Optra SC, Optra K 1220, Optra Color 45
and Optra Color 1200 Coax/Twinax Adapter
for SCS
Installation and
User's Guide
for
a detailed description on how to set up the SCS adapter.
