24
If this is the last printer setting to change, press
Return
to back up to the list of menus.
Press
Go
twice to display the
Ready
status message. See section
3.6 Activating Saved
Option Changes
on page 25.
3.5 Changing a Numerical Setting
If you choose a menu item that has a numerical value, the item name appears in the first
line of the operator panel display and the numerical value displays in the second line of
the operator panel display.
The current setting has an asterisk (*) next to it.
To increase the numerical value, press
Menu>
; to decrease the current setting, press
<Menu
. The displayed setting changes accordingly. To save the new setting, press
Select
. An asterisk (*) is displayed next to the new setting.
For example, if you select
MENUS, IPDS MENU, PAPER HANDLING, Top
Margin
, you see the following display:
Press
Menu>
or
<Menu
to increase or decrease the offset in pels for the default top
margin. Then press
Select
. The display shows the new settings for one second and then
clears and shows the word
SAVED
. Press
Return
to back up the list of menus, or press
Go
once to display the
IDPS MENU
and a second time to display the
Ready
status
message if this is the last printer setting to be changed. See
Activating Saved Option
Changes
below.
Another type of numerical value is found if you select
MENUS
,
IPDS MENU
,
EMULATION
and
Default CPI
. This option consists of two numbers, which are set
independently of each other. Use
Menu>
or
<Menu
to increase or decrease the number
value. Press
Select
to switch to the second number after setting the first. Press
Select
again to save the value. See display below.
