115
7 Printer Messages and Problems
Review these problems and solutions for possible answers to your questions.
Use the table below if you are searching for information on a printer message.
Message
Problem Reference
36 Resolution Reduced
2
38I Memory Full
5
Bad Memory System
11
Memory Full
5
Menus Disabled
4
Not enough memory for IPDS
14
Recycle PWR to activate value
15
Resources Lost
16
Two IPDS Sources Recycle Power
8
1.
Problem:
The print queue stops with a fatal error, which requires operator intervention or
the printer stays Busy and displays
IPDS
even when no IPDS jobs are printing.
Solution:
The host still has control of the printer. You need to adjust the SCS adapter
timeout, the end-of-job timeout on your network adapter, the printer
IPDS
Timeout
value, the host port value, or the appropriate timer/timeout value on your
IPDS host. You may have to adjust a combination of these to solve the problem.
SCS Adapter
See page 106 for a description of how to change the
Coax Timeout
value for the
SCS adapter.
See page 111 for a description of how to change the
Twinax Timeout
value for
the SCS adapter.
