67
5.2.1 Selecting the MarkNet S TCP/IP Protocol Settings
From the printer operator panel, do the following:
1.
Press
Menu>
until the
NETWORK MENU
displays. Press
Select
.
2.
Press
Menu>
until the
NETWORK OPTION 1
displays. Press
Select
.
(This example assumes the MarkNet S Adapter is installed in option
connector 1.)
3.
Press
Menu>
until you see
NETWORK 1 SETUP
. Press
Select
.
4.
Press
Menu>
until you see
TCP/IP
. Press
Select
.
Here you find the following settings:
Activate
Yes
Enable BOOTP
Yes
or
No
(Yes, if you use a BOOTP server.)
(No, if you set the IP address another way.)
Enable DHCP
Yes
or
No
(Yes, if you use a DHCP server.)
(No, if you set the IP address another way.)
Enable RARP
Yes
or
No
(Yes, if you use a RARP server.)
(No, if you set the IP address another way.)
Set IP Address
157.184.67.102
(Address available from your network administrator)
Set IP Netmask
255.255.255.0
(Appropriate netmask for your network)
Set IP Gateway
157.184.67.1
(IP address of the IP gateway)
Set Hostname
Name
(Necessary when using DHCP server.)
