Lexmark Optra Color 45 Service Manual Download

Page: 85 / 122

Repair Information

4-17

4080-001

Paper Tray Assembly Removal

1. Open the front access door and remove. Refer to

“Covers and

Doors” on page 4-3

2. Move the manual paper guide to the left.

3. Remove the screw from the right side of the paper tray and

remove the tray.

Small Feed Roller Assembly Removal

1. Remove the input / output tray assembly.

2. Remove all covers, refer to

“Covers and Doors” on page 4-3

3. Remove the carrier frame assembly, refer to the

“Carrier

Frame Assembly Removal” on page 4-11

4. Press down on the small feed rollers to remove, refer to the

“Paper Feed” on page 4-14

Small Feed Roller Holder Assembly Removal

1. Remove the input / output tray assembly.

2. Remove all covers, refer to

“Covers and Doors” on page 4-3

3. Remove the carrier frame assembly, refer to the

“Carrier

Frame Assembly Removal” on page 4-11

4. Press down on the small feed rollers to remove, refer to the

“Paper Feed” on page 4-14

5. Depress the three clips securing the small feed roller holder

assembly and remove.

Star Roller Assembly Removal

1. Remove the input / output tray assembly.

2. Open the access door, refer to the

“Covers and Doors” on

page 4-3

3. Remove the two screws from the star roller assembly and

remove.

Summary of Contents for Optra Color 45



























































































































Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands

Lexmark Optra Color 45, Service Manual

Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands