Lexmark Optra Color 45 Service Manual Download

Page: 97 / 122

Repair Information

4-29

4080-001

Carrier Transport Motor Assembly Removal

1. Remove the input / output tray assembly.

2. Remove all covers (except the left and base covers), refer to

“Covers and Doors” on page 4-3

3. Remove the carrier belt, refer to the

“Carrier Belt Removal” on

page 4-28

4. Disconnect the carrier transport motor connector (CN5) from

the engine board.

5. Remove the belt from the carrier transport motor pulley.

6. Remove the two screws securing the carrier transport motor to

the carrier frame and remove the motor. Note the routing of the
motor cable.

Encoder Strip / Retainer Removal

1. Remove the input / output tray assembly.

2. Remove the front cover, refer to

“Covers and Doors” on

page 4-3

3. Gently release the tension on the encoder strip by flexing the

encoder strip tensioner and remove the encoder strip.

4. Remove the encoder strip retainer if necessary.

Note: When reinstalling the encoder strip, be sure the ends of the
strip are centered in their mounting notches and the strip does not
bind in the encoder card on the carrier.

Summary of Contents for Optra Color 45



























































































































Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands

Lexmark Optra Color 45, Service Manual

Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands