Lexmark Optra Color 45 Service Manual Download

Page: 66 / 122

3-14

Service Manual

4080-001

Printing Menu Settings Page

This test page must be printed on letter, legal or A4 paper.

To print the Menu Settings Page:

1. Select the TESTS MENU.

2. Select Print Menus from the TESTS MENU.

The page contains the following information:

•

A list of all the printer settings contained in the control panel
menus and their values.

•

A list of the installed options and features such as RAM memory
SIMMs, optional input paper trays, flash or disk.

•

Printer information such as serial number, page count, installed
RAM, engine code level, RIP code level, control panel code
levels, font ROM version, SRAM availability, supplies status and
color settings.

Summary of Contents for Optra Color 45



























































































































Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands

Lexmark Optra Color 45, Service Manual

Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands