Lexmark E260 Series User Manual Download Page 94

Page: 94 / 156

Load manual feeder with <x>

Try one or more of the following:

•

Load the specified paper in the manual feeder.

•

Cancel the current job.

Load <src> with <x>

Try one or more of the following:

•

Load the tray or other source with the correct paper type and size.

•

Cancel the current job.

Not Ready

Press and release either

to return to the Ready state.

Power Saver

The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of Power
Saver mode.

Programming Engine Code DO NOT POWER OFF

Wait for the message to clear.

Warning—Potential Damage:

Do not turn the printer power off while

Programming Engine Code

appears

on the display.

Programming System Code DO NOT POWER OFF

Wait for the message to clear.

Warning—Potential Damage:

Do not turn the printer power off while

Programming System Code

appears

on the display.

Ready

The printer is ready to receive print jobs.

Restoring Factory Defaults

Wait for the message to clear. When factory default settings are restored, all downloaded resources in the printer
memory are deleted. This includes fonts, macros, and symbol sets.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Understanding printer messages

Summary of Contents for E260 Series





























































































































































Search results

Summary of Contents for E260 Series

Reviews:

Related manuals for E260 Series

Brands by name

Popular brands

Lexmark E260 Series, User Manual

Search results

Summary of Contents for E260 Series

Reviews:

Related manuals for E260 Series

Brands by name

Popular brands