Note:
Some modes may not apply to your product.
Mode
Description
Power consumption (Watts)
Printing
The product is generating hard
‑
copy output from electronic
inputs.
One
‑
sided: 560 (CS720, CS727);
680 (CS725, CS725R, CS728)
Two
‑
sided: 470 (CS720, CS727);
570 (CS725, CS728)
Copy
The product is generating hard
‑
copy output from hard
‑
copy
original documents.
N/A
Scan
The product is scanning hard
‑
copy documents.
N/A
Ready
The product is waiting for a print job.
45
Sleep Mode The product is in a high
‑
level energy
‑
saving mode.
2.4
Hibernate
The product is in a low
‑
level energy
‑
saving mode.
0.2
Off
The product is plugged into an electrical outlet, but the power
switch is turned off.
0.2
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See
for current values.
Sleep Mode
This product is designed with an energy-saving mode called
Sleep Mode
. The Sleep Mode saves energy by
lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged
after this product is not used for a specified period of time, called the
Sleep Mode Timeout
.
Factory default Sleep Mode Timeout for this product (in minutes):
15
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes.
Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response
time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more
energy.
Hibernate Mode
This product is designed with an ultra
‑
low power operating mode called
Hibernate mode
. When operating in
Hibernate Mode, all other systems and devices are powered down safely.
The Hibernate mode can be entered in any of the following methods:
•
Using the Hibernate Timeout
•
Using the Schedule Power modes
Factory default Hibernate Timeout for this product in all countries or regions
3 days
The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified
between one hour and one month.
Notices
126
Summary of Contents for CS720 Series
