Action
Yes
No
Step 1
a
Squeeze and slide the paper guides to the correct position for
the size of the paper you are loading.
b
Resend the print job.
Are the margins correct?
The problem is
solved.
Go to step 2.
Step 2
a
From the Paper menu on the control panel, check if the printer
is detecting the correct paper size.
b
Resend the print job.
Are the margins correct?
The problem is
solved.
Go to step 3.
Step 3
a
Depending on your operating system, specify the paper size
from the Printing Preferences or Print dialog.
Notes:
•
Make sure that the settings match the paper loaded in
the tray.
•
You can also change the settings on the printer control
panel.
b
Resend the print job.
Are the margins correct?
The problem is
solved.
Contact
Jagged or uneven characters
Troubleshooting
92
Summary of Contents for CS720 Series
