Lexmark C6160 User Manual Download Page 67

Page: 67 / 142

Insert the staple cartridge holder.

Close door G.

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing
until you are ready to use them.

Do not expose supplies to:

•

Direct sunlight

•

Temperatures above 35°C (95°F)

•

High humidity above 80%

•

Salty air

•

Corrosive gases

•

Heavy dust

Moving the printer

Moving the printer to another location

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or

more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

Maintaining the printer

Summary of Contents for C6160















































































































































Search results

Summary of Contents for C6160

Reviews:

Related manuals for C6160

Brands by name

Popular brands

Lexmark C6160, User Manual

Search results

Summary of Contents for C6160

Reviews:

Related manuals for C6160

Brands by name

Popular brands