Lexmark 4310-VW SERIES, Service Manual

Page: 28 / 72

2-9
Service Manual
Lexmark S800 Series
1212 Watchdog Error Indicates printer system was
reset by Watchdog timer;
Subsystem stall failure.
Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See
“System
board with media sensor, cable, and
spring removal” on page 4-21
.
1213 Data Abort Error Firmware attempted to load or
store to an invalid address. Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See “System
board with media sensor, cable, and
spring removal” on page 4-21
.
1214 Invalid Processor Mode Error Indicates the ARM processor
was in an incorrect mode to
perform the requested
operation. Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See “System
board with media sensor, cable, and
spring removal” on page 4-21
.
1215 Math Error There is a problem doing math,
such as dividing by zero.
Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See “System
board with media sensor, cable, and
spring removal” on page 4-21
.
1216 Mailbox Error Problem with the internal
mailbox messaging system. Technical Support Center:
The printer will auto reset.
Service:
The printer will auto reset.
Error
Code
Name Description Action