Repair information
4-22
Lexmark S800 Series
Star wheel cross bar assembly removal
Note:
•
It is not necessary to remove the printhead, but doing so will give better visibility for installation.
•
The carrier has to be unlocked so that it can be moved to access the starwheel screws.
1. Remove the right side cover. See
“Right side cover removal” on page 4-5
.
2. Remove the left side cover. See
“Left side cover removal” on page 4-6
.
3. Remove the rear cover. See
“Rear cover removal” on page 4-12
.
4. Remove the front door/operator panel/camera assembly. See
“Front door/operator panel/camera assembly
5. Open the inner front door.
6. Slide the printhead to the right, and remove the left side screw (A) using a Phillips screwdriver. Repeat for the
right side screw.
7. Lift the starwheel crossbar, and remove.
Summary of Contents for 4310-VW SERIES
