Lexmark 4310-VW SERIES, Service Manual

Page: 59 / 72

Repair information
4-24
Lexmark S800 Series
Wireless (INA) card removal
1. Remove the right side cover. See “Right side cover removal” on page 4-5 .
2. Remove the left side cover. See
“Left side cover removal” on page 4-6
.
3. Remove the inner front cover. See “Inner front cover removal” on page 4-8 .
4. Remove the two screws from the metal RFID card bracket, and pull out slightly.
5. Remove the one screw (A), and remove the top of the wireless card cover.
6. Disconnect the mini USB cable (B) from the wireless card.
7. Remove the one screw from the top of the wireless card.
8. Lift the wireless card out, and remove.
Installation note: To install the wireless (INA) card, place the card back in its cover, connect the cable, place the top
cover back on the housing, and place the housing back in the printer.