Lexmark 4310-VW SERIES, Service Manual

Page: 48 / 72

4-13
Service Manual
Lexmark S800 Series
Front door/operator panel/camera assembly removal
1. Remove the right side cover. See “Right side cover removal” on page 4-5 .
2. Remove the left side cover. See
“Left side cover removal” on page 4-6
.
3. Remove the inner front cover. See “Inner front cover removal” on page 4-8 .
4. Remove the lower front door. See
“Lower front door removal” on page 4-9
.
5. Remove the rear cover. See “Rear cover removal” on page 4-12 .
6. Tilt the top of the printer forward, and disconnect the two mini USB cables (A) from the right side of the system
board.
CAUTION: Hold or tape the assembly lid shut to prevent it from falling open.
7. Disconnect the APPSFFC cable (B) and the LID Sens cables (C) from the system board.