Lexmark 4036-307, Service Manual

Page: 53 / 134

Diagnostic aids
3-7
4036-307, -308
Panel Menus
To change the Panel Menus setting:
1.
Touch to select Panel Menus from the Configuration Menu.
2.
The panel displays the setting's name in the header and [setting's current value] below the header
row. Touch or to change the setting. The selections are Disable and Enable. The default is Enable.
3.
Touch Submit to save your change.
Touch Back to exit without changing the value.
Format Fax Storage
This setting enables you to format the non-volatile storage used for storing faxes.
To change this setting, touch to select Format Fax Storage from the Configuration Menu. Formatting
Fax Flash DO NOT POWER OFF appears on the LCD while the format operation is active.
Note: If an advanced password has been established, you must enter this password in order to change the
setting.
ADF Edge Erase
The ADF Edge Erase and FB Edge Erase settings specify, in millimeters, the size of a border around the
scanned image that will be erased. For copies, the printed page will have a 2 mm no-print border. The larger of
the 2 mm no-print border and the Edge Erase setting will be used in this situation.
To change this setting:
1.
Touch to select ADF Edge Erase from the Configuration Menu.
The panel displays the setting's name in the header and [setting's current value] below the header
row.
2.
Touch to increase the value or to decrease the value.
3.
The values are 0 through 6. The default is 3.
4.
Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
FB Edge Erase
The ADF Edge Erase and FB Edge Erase settings specify, in millimeters, the size of a border around the
scanned image that will be erased. For copies, the printed page will have a 2 mm no-print border. The larger of
the 2 mm no-print border and the Edge Erase setting will be used in this situation.
To change this setting:
1.
Touch to select FB Edge Erase from the Configuration Menu.
The panel displays the setting's name in the header and [setting's current value] below the header
row.
2.
Touch to increase the value or to decrease the value.
3.
The values are 0 through 6. The default is 3.
4.
Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.