![background image](http://html1.mh-extra.com/html/lexmark/4036-307/4036-307_service-manual_1888865028.webp)
2-14
Service Manual
4036-307, -308
Display panel remains blank
Frequent paper jam, double feed, or skew
Image does not appear
Step
Action and Question
Yes
No
1
Check the display cable.
1. See
“Control panel assembly removal” on page 4-
24
to locate the display cable.
2. Disconnect and reconnect the display cable
connection (A).
3. Reassemble the scanner and power it on.
Is the display panel still blank?
Go to step 2
Done
2
Replace the display panel assembly.
Is the display panel still blank?
Replace the
keypad board
Done
Step
Action and Question
Yes
No
1
Is the paper correctly set in the tray?
Go to step 2
Properly position paper in
document feeder
2
Is the specified paper used?
Go to step 3
Use correct feeder
3
Is the pick pad damaged?
Replace pick pad
Go to step 4
4
Is the pick roller damaged or worn?
Replace paper feed
assembly
Replace pick roller assembly
Step
Action and Question
Yes
No
1
Are you placing the original on the
flatbed?
Go to step 2
Go to step 3
2
Is the flatbed CCD cable connected?
Replace the scanner control
board
Connect cable
3
Is the ADF cover open?
Close the cover
Go to step 4
4
Is the ADF/CCD data cable connected?
Replace the ADF optical unit
Connect cable and
tighten screws
Summary of Contents for 4036-307
