Lexmark 4036-307, Service Manual

Page: 24 / 134

2-10
Service Manual
4036-307, -308
37 Insufficient
memory for Flash
Memory Defragment
operation The MFP cannot defragment
flash memory because the
memory used to store
undeleted flash resources is
full. Touch Continue to clear the message.
To perform the defragment operation,
install additional memory, or delete fonts,
macros, and other data to free some
memory space.
Touch Reset Active Bin to change to
another linked bin.
37 Insufficient
memory to collate
job The MFP cannot collate the
job because the memory is
full. Touch Continue to print the pages
processed before the memory became full.
Some memory frees up, so collating
begins for the remainder of the print job.
For example, if a 50-page print job is sent,
and 10 copies are requested, and the MFP
runs out of memory at page 30, the MFP
would collate and print 10 copies of pages
1–30. The MFP would then print and
collate pages 31–50 and print 10 copies of
these pages.
37 Insufficient
memory, some Held
Jobs were deleted Held jobs are deleted in order
to process the current job. Touch Continue to clear the message and
continue printing.
To avoid this error in the future for other
jobs, install more memory.
Touch Cancel Job to cancel the current
job if needed.
38
Memory full
The MFP is processing data,
but the memory used to store
pages is full. To avoid this error in the future:
Simplify the print job by reducing the
amount of text or graphics on a page and
deleting unnecessary downloaded fonts or
macros.
Install additional memory.
Touch Cancel Job to cancel the current
job if needed.
Touch Reset Active Bin to change to
another linked bin.
57 Configuration
change, some held
jobs were not
restored This message appears once
after the firmware tries to
restore all of the jobs on the
hard disk regardless of the
number of held jobs that were
not restored.
Configuration of the MFP may
have changed due to:
• print media option(s)
removal, such as a tray or
bin being removed
• the hard disk was installed
from a different MFP
model
• the speed of the MFP
Touch Continue. Some held jobs are not
restored. They stay on the hard disk and
are inaccessible.
290 .00 Scanner jam,
remove all
originals from the
scanner The scanner detects an
original document at the
automatic document feeder
(ADF) feed sensor while it is
idle. This is a type of jam. Remove all original documents from the
ADF to clear the jam. The message clears
and either page or job recovery completes.
User attendance messages (continued)
Error
code Sub
codes
Display text Description Action