Change <src> to <x>
<src> is a tray or feeder, and <x> is a paper size or type.
You can change the current paper source for the remainder of the print job. The formatted page will print on the paper
loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:
•
Select the paper tray with the correct paper size or type.
•
Touch
Use current [src]
to ignore the message and print from the tray selected for the print job.
•
Touch
Continue
to continue the job if the correct size and type are loaded in the tray, and this size and type are
specified in the printer control panel Paper menu.
Note:
If you touch Continue when there is no paper in the tray, the job is not continued.
•
Touch
Cancel job
to cancel the current job.
Check tray <x> connection
Try one or more of the following:
•
Turn the printer off and then back on.
If the error occurs a second time:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the tray.
4
Reattach the tray.
5
Connect the power cord to a properly grounded outlet.
6
Restart the printer.
If the error occurs again:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the tray.
4
Contact Customer Support.
•
Touch
Continue
to clear the message and print without using the tray.
Close front door
Close the front door of the printer.
Close door or insert cartridge
The cartridge is missing or not installed correctly. Insert the cartridge, and then close all doors and covers.
Connect <x>bps
The fax is connected. Wait for the message to clear.
Note:
<x> is the baud rate per second.
Troubleshooting
255
