32
MIDI Configurations
All Reflex parameters, presets, and reg-
isters can be accessed by any MIDI device
which can send MIDI Program Change and
Continuous Controller messages, such as a
MIDI-equipped synthesizer, master keyboard
controller, foot controller, sequencer, or the
Lexicon MRC remote control unit.
A typical MIDI setup is shown below.
Connect the MIDI output of the controller to
the MIDI input of Reflex, using a standard
MIDI cable.
MIDI
REMOVE
RACK
EAR TO
ACCESS
MIDI
OUT/THRU
JUMPER
OUT/
THRU
IN
MIDI In
MIDI Tempo control
When using Tempo as a control Source,
you must send MIDI Clock messages from
the MIDI controller to Reflex as shown below.
(MIDI clock)
Sequencer, Drum machine
or computer
MIDI
REMOVE
RACK
EAR TO
ACCESS
MIDI
OUT/THRU
JUMPER
OUT/
THRU
IN
MIDI In
Controller Quirks
Some synthesizers and controllers can-
not send the full range of MIDI program
change messages (1-128). With them, you
can't access all the registers in Reflex. Oth-
ers may appear to be able to send only 32,
but actually have a bank mode that does let
you send all 128 program change mes-
sages. Also, be aware that some MIDI de-
vices use a program numbering system that
uses 0-127 instead of 1-128. If in doubt, see
the manual for your controller.
The PARAMETER/LEARN LED will
flicker as long as MIDI Clock is being re-
ceived.
MIDI Out
MIDI Out
