Lexicon REFLEX -, User Manual

Page: 36 / 49

FOOTSWITCH
POWER OUTPUTS INPUTS
9V~, 1A,
50-60Hz
LEXICON, INC.
WALTHAM MA 02154
MADE IN U.S.A.
P/N 021-10203
SERIAL #
THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED<
INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
BYPASS
STEP
COMMON
L
(PHONES)
L R
(MONO)
R
(MONO)
USE LEXICON
MSA AC ADAPTER
REFLEX
MIDI
REMOVE
RACK
EAR TO
ACCESS
MIDI
OUT/THRU
JUMPER
:TIP
:RING
:SLEEVE
OUT/
THRU
IN
FOOTSWITCH
POWER OUTPUTS INPUTS
9V~, 1A,
50-60Hz
LEXICON, INC.
WALTHAM MA 02154
MADE IN U.S.A.
P/N 021-10203
SERIAL #
THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED<
INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
BYPASS
STEP
COMMON
L
(PHONES)
L R
(MONO)
R
(MONO)
USE LEXICON
MSA AC ADAPTER
REFLEX
MIDI
REMOVE
RACK
EAR TO
ACCESS
MIDI
OUT/THRU
JUMPER
:TIP
:RING
:SLEEVE
OUT/
THRU
IN
33
The figure below shows the MIDI connec-
tions for controlling Reflex simultaneously
with MIDI Clocks from a sequencer, and
messages from another MIDI controller.
Note that the controller is set to “local control
off” and the sequencer is set to “echo input.”
Two Reflex units can be slaved together
by connecting a cable from the MIDI OUT
jack of the master to the MIDI IN jack of the
slave. Additional units can be slaved to the
master by setting the MIDI port of one of the
slave units to THRU, then connecting this
port to the MIDI IN port of the next unit. All of
the units must be set to the same MIDI
channel.
When connected in this way, the slave
Reflex(s) will be remotely controlled by the
front panel of the master as follows:
• In general, whenever the master’s VALUE
knob is used to change a parameter value,
a corresponding parameter change will
occur on the slave(s).
• Loading presets or registers on the master
will cause the slave(s) to load their preset
or register of the same number. (Note: a
slave’s register contents will not necessar-
ily be the same as the master’s.)
Slave
Master
MIDI Out
MIDI In
MIDI Thru
MIDI In
MIDI Out
(MIDI clock)
Sequencer or computer
"Echo Input"
MIDI Instrument
"Local Off"
MIDI In
MIDI
REMOVE
RACK
EAR TO
ACCESS
MIDI
OUT/THRU
JUMPER
OUT/
THRU
IN
MIDI Out
MIDI In