Lexicon MC-4, User Manual

Page: 68 / 164

SETUP
Lexicon
3-30
SUBWOOFER
FULL, 30Hz–120Hz, THX 80Hz, NONE
Opens the SUBWOOFER menu, which can be used to select a
crossover point for the audio output connector labeled Subwoofer.
When set to FULL, the MC-4 sends a full-range audio signal to
this connector. Otherwise, the MC-4 activates a crossover point at
the selected setting. Choose the setting equal to the lowest setting
of the other loudspeakers.
Note:
When the SUBWOOFER parameter is set to NONE,
subwoofer signals will not be redirected if the
5.1a BYPASS listening mode is activated. Use the
associated DVD-A/SACD player to configure the
speaker setup to to redirect subwoofer signals.
SUBWOOFER CUSTOM SETUP SPEAKERS SETUP
Custom Speaker Setups
(continued)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
SUBWOOFER 40Hz
SUBWOOFER
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE