Lexicon MC-4, User Manual

Page: 142 / 164

Audio Performance
Composite & S-video Performance
Video Input & Output Connectors
Audio Input & Output Connectors
Appendix
Lexicon
A-2
SPECIFICATIONS
8 stereo (RCA) or 5 stereo and one 5.1-channel or 2
stereo and two 5.1-channel connectors
• 4 S/PDIF coaxial (RCA) and 4 S/PDIF optical (TosLink)
connectors
• Coaxial and optical input connectors conform to IEC-
958, S/PDIF standards
• Accepts 44.1, 48, 88.2 and 96kHz sample rates
• Accepts 16–24 bits PCM audio, Dolby Digital, DTS
and DTS-ES discrete data formats
8 unbalanced (RCA) connectors for Front L/R, Center,
Subwoofer, Side L/R and Rear L/R
Analog Audio Inputs
Digital Audio Inputs
Audio Outputs
24-bit, 96kHz, dual-bit
∆∑
architecture
24-bit, 44.1 to 192kHz, multi-bit
∆∑
architecture
10Hz to 20kHz, +0.05dB/–0.1dB, –0.5dB at 40kHz,
reference 1kHz
Below 0.008% at 1kHz, maximum output level
108dB minimum, 22kHz bandwidth
108dB minimum, 22kHz bandwidth
A/D Conversion
D/A Conversion
Frequency Response
THD + Noise
Dynamic Range
Signal-to-Noise Ratio
200mVrms (2Vrms for maximum output level) at 0dB
input gain
100k
Ω
in parallel with 150pF
• 150mVrms typical, 6Vrms maximum
• Maximum value with full-scale input signal and volume
at +12dB
100
Ω
in parallel with 150pF
Input Sensitivity
Input Impedance
Output Level
Output Impedance
NTSC, PAL and SECAM
Active
1.0V peak-to-peak
Compatibility
Switching
Output Level
75
Ω
>40dB
<0.5%
<0.5°
>25MHz
<0.3%
±0.15dB
>65dB
Impedance
Input Return Loss
Differential Gain
Differential Phase
Bandwidth
K Factor
Gain
Signal-to-Noise Ratio
10Hz to 10MHz + 0.1/–0.3dB Frequency Response
Video Inputs
Video Outputs
5 composite (RCA), 5 S-video and 3 component video
(RCA)
1 composite (RCA), 1 S-video and 1 component
(RCA)