manualshive.com logo in svg

Lexicon MC-4, User Manual

Share
Download
Lexicon MC-4 User Manual Download Page 115

5-17

, ULTRA2, 

& SurEX

•

Designed for playback of 5.1-channel Dolby Digital film
sources. 

•

Listening mode name differs depending on the encoding
present in the input source, the SURROUND EX parameter
setting and the speaker setup. The table on the next page
indicates the conditions in which THX Surround EX and THX
Ultra2 decoding are engaged.

•

Allows 7-channel playback of 5.1-channel Dolby Digital
sources without Surround EX encoding.

•

Applies THX re-equalization to simulate high-frequency
rolloffs that occur in movie theaters. Most films are mixed for
movie
theaters and might sound too bright when played back in
home theaters without re-equalization.

•

Applies THX timbre matching to minimize timbre differences
between the front and surround channels, which results in
smoother sound movements between them.

•

When the THX ULTRA2 listening mode is activated, ASA pro-
cessing is applied to signals sent to the rear speakers. See
“ASA” on page 3-32 for more information.

•

When the THX ULTRA2 listening mode is activated, adaptive
de-correlation increases the perceived width of the listening
space. De-correlation of the mono surround channel increases
the perceived width of the surround field in home theaters.

•

When the THX SurEX listening mode is activated, matrix
decoding derives three surround channels from 5.1-channel
Dolby Digital sources.

•

Recommended for home theaters with THX-certified speaker
setups.

5.1 MUSIC

•

A proprietary Lexicon listening mode.

•

Based on the 5.1 L7 FILM listening mode, but specifically
tailored for music sources.

•

Designed for playback of 5.1-channel Dolby Digital-encoded
music sources.

•

Recommended for 5.1-channel Dolby Digital-encoded music
sources.

Option/

Default

Possible

Parameter

Setting

Settings

VOCAL ENHANCE

+0.0dB

+6.0dB, +3.0dB, +0.0dB

5 SPKR ENHANCE

ON

ON, OFF

BASS ENHANCE

OFF

ON, OFF

RE-EQUALIZER

OFF

ON, OFF

REAR DLY OFFSET

15ms

OFF, 1ms to 30ms

COMPRESSION

OFF

AUTO, ON, OFF

LFE MIX

+0.0dB

–10.0dB to +0.0dB

OUTPUT LEVELS

—

—

CUSTOM

—

—

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for
detailed descriptions of these options and parameters.

MODE ADJUST

MC-4

MODE ADJUST

5.1 L7 MUSIC

MODE ADJUST

THXI OR

THXI

ULTRA2

OR

5.1 

THXI

SurEX

Summary of Contents for MC-4





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands