Lexicon MC-4, User Manual

Page: 65 / 164

SETUP
MC-4
3-27
CENTER
FULL, 30Hz–120Hz, THX 80Hz, NONE
Opens the CENTER SPEAKER menu, which can be used to select a
crossover point for the audio output connector labeled Center.
When set to FULL, the MC-4 sends a full-range audio signal to
this connector. Otherwise, the MC-4 activates a crossover point at
the selected setting. Choose the setting closest to the low-
frequency rating of the center loudspeaker. When set to NONE,
the MC-4 redirects center-channel signals to the audio output
connectors labeled Front L/R.
CENTER CUSTOM SETUP SPEAKERS SETUP
Note:
When the CENTER parameter is set to NONE,
center-channel signals will not be redirected if the
5.1a BYPASS listening mode is activated. Use the
associated DVD-A/SACD player to configure the
speaker setup to to redirect center-channel signals.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
CENTER 60Hz
CENTER SPEAKER
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE