manualshive.com logo in svg

Lexicon MC-4, User Manual

Share
Download
Lexicon MC-4 User Manual Download Page 117

5-19

DIGITAL & 

DIGITAL EX  

•

Designed for playback of 5.1-channel Dolby Digital sources.
The DOLBY DIGITAL listening mode is recommended for
Dolby Digital sources recorded with Dolby Digital Surround
EX. This listening mode can also be used with 5.1-channel
Dolby Digital sources with mixed results.

•

Listening mode name differs depending on the encoding
present in the input source, the EX DECODING parameter
setting and the speaker setup. The table on the next page
indicates the conditions in which Dolby Digital Surround EX
decoding is engaged.

•

Decodes 5.1 discrete channels from 5.1-channel Dolby Digital
sources. The five main channels are full-frequency. The .1
channel, often referred to as LFE information, has a limited
frequency range of 120Hz. 

•

When the DOLBY DIGITAL EX listening mode is activated,
matrix decoding derives a surround back channel from the
other surround channels.

Option/

Default

Possible

Parameter

Setting

Settings

EX DECODING

AUTO

AUTO, ON, OFF

COMPRESSION

OFF

AUTO, ON, OFF

LFE MIX

+0.0dB

–10.0dB to +0.0dB

OUTPUT LEVELS

—

—

CUSTOM

—

—

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for
detailed descriptions of these options and parameters.

MUSIC

•

Designed for playback of 5.1-channel Dolby Digital music
sources.

•

The 5.1 THX MUSIC listening mode cannot be activated
unless side and rear speakers are present.

•

ASA processing is applied to signals sent to the rear speakers.
See “ASA” on page 3-32 for more information.

•

Recommended for home theaters with THX-certified speaker
setups.

Option/

Default

Possible

Parameter

Setting

Settings

COMPRESSION

OFF

AUTO, ON, OFF

LFE MIX

+0.0dB

–10.0dB to +0.0dB

OUTPUT LEVELS

—

—

CUSTOM

—

—

See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for
detailed descriptions of these options and parameters.

Note:

The 5.1 THX MUSIC listening mode can only be
activated with the front panel or remote control
Mode 

and 

buttons.

MODE ADJUST

MC-4

MODE ADJUST

THXI

MUSIC

MODE ADJUST

%!

DIGITAL EX

OR

%!

DIGITAL

Summary of Contents for MC-4





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands