manualshive.com logo in svg

Lexicon MC-4, User Manual

Share
Download
Lexicon MC-4 User Manual Download Page 118

5-20

Note:

The MC-4 cannot automatically detect Dolby Digital
Surround EX encoding in non-flagged 5.1-channel
Dolby Digital sources. A non-flagged source does not
include information in the input signal that identifies
Dolby Digital Surround EX encoding.

The table below indicates the conditions in which Dolby
Digital Surround EX decoding is engaged.

•

Dolby Digital Surround EX decoding is engaged when the EX
DECODING parameter is set to ON or the EX DECODING
parameter is set to AUTO and a flagged 5.1-channel Dolby
Digital source recorded with Dolby Digital Surround EX is
detected.

•

Dolby Digital Surround EX decoding is not engaged when the
EX DECODING parameter is set to OFF or the EX DECODING
parameter is set to AUTO and a non-flagged 5.1-channel
Dolby Digital source recorded with or without Dolby Digital
Surround EX is detected.

•

Listening mode name differs depending on the encoding
present in the input source, the EX DECODING parameter
setting and the speaker setup.

–

The DOLBY DIGITAL EX listening mode is available when
Dolby Digital Surround EX decoding is engaged.

–

The DOLBY DIGITAL listening mode is available when
Dolby Digital Surround EX decoding is not engaged.

–

The DOLBY DIGITAL EX listening mode cannot be activat-
ed unless both side and rear speakers are present.

MODE ADJUST

Lexicon

5.1-Channel Dolby

Digital EX (Non-Flagged)

5.1-Channel Dolby

Digital EX (Flagged)

5.1-Channel

Dolby Digital

DOLBY DIGITAL

DOLBY DIGITAL EX

DOLBY DIGITAL

EX DECODING: AUTO

DOLBY DIGITAL EX

DOLBY DIGITAL EX

DOLBY DIGITAL EX

EX DECODING: ON

DOLBY DIGITAL

DOLBY DIGITAL

DOLBY DIGITAL

EX DECODING: OFF

Parameter
Setting

Input

Source

Summary of Contents for MC-4





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands