8.18. Replacing bulbs
Important instructions for replacement of indicators, indicators and bulbs:
Caution: Always switch off the safety cut-out first before any part of the lighting
system will be replaced or fixed.
Caution: Never touch a bulb at the glass casing with bare fingers. This effects the life
time of the bulb most negatively.
The LEVO combi is supplied with the following types of bulbs:
- lights in front, white
12V / 3W, screw thread E10
- indicators in front/back, orange
24V / 10W, bayonet fixing
- lights at the backside, orange
24V / 5W, stick lock
Replacement of the bulb in a light (front, white)
B
A
21
!
Loosen the screw (A) using a small Phillips screwdriver and remove the white cover plate
(B).
!
Turn the bulb counter clock wise off the thread.
!
Replace the bulb in the reverse order.
Replacement of the bulb in a indicator (front/back, orange)
!
Loosen the screw using a small Phillips screwdriver and remove the orange cover plate.
!
Press the bulb smoothly into the thread and turn it simultaneously counter clock wise off
the thread.
Replace the bulb in the reverse order.
Replacement of the bulb in a light (back, red)
22
A
!
Open the cover of the battery box.
!
Turn the bayonet fixing (A) (the bulb is integrated in
this part) counter clock wise and take it out of the
casing.
!
Remove the bulb from the thread.
!
Replace the bulb in the reverse order.
57
