Levo AG Combi Instruction And Service Manual Download Page 58

Page: 58 / 63

8.19. Replacing the light (front, white)

Disconnect the light plug (A) from the battery box.

he correlated

he bulb thread carefully out to unplug the

hexagon screw (C) including the serrated

light in the reverse order.

.20. Replacing the indicator

linker at the back

Open the cover of the battery box.

ker.

ables to the battery box.

icator in the reverse order.

linker at the front

Loosen the screw at the cover plate of the indicator using a Phillips screwdriver and

e indicator casing the hexagon screw using the correlative 5 mm

icator in the reverse order.

Loosen the screws at the side using a 5 mm hexagon
key for removing the white light (B).
Loosen the Phillips head screw using t
screwdriver and remove the cover plate from the ligh
(D).
Pull t
connectors.
Remove the

washer using a 5 mm hexagon key.
Demount the ligth.

Reassemble the new

!
!

Demount the bulb thread of the blin

Unplug all connectors and pull back the c

Remove the indicator.

Reassemble the new ind

remove the cover plate.
Loosen in the inside of th
key.
Remove the indicator from the base fram

Unplug all connectors.

Reassemble the new ind

Summary of Contents for Combi
































































Search results

Summary of Contents for Combi

Reviews:

Related manuals for Combi

Brands by name

Popular brands

Levo AG Combi, Instruction And Service Manual

Search results

Summary of Contents for Combi

Reviews:

Related manuals for Combi

Brands by name

Popular brands