6.2.
V-Trak backrest system (optional)
Fitting and removing the V-Trak backrest
!
Lift both backrest levers (A) at the back shell the
way that they can turn freely.
Fitting:
1
A
B
!
For fitting the back stick the clamp bolt of both
backrest levers in the tubes of the connecting
piece (B) of both backrest tubes. The back shell
should be in front of the backrest tubes for
fitting. For fixing both backrest lever (A) push
them
down.
(See
picture
1).
Removing:
!
For removing the back fold the backrest lever
(A) up on both sides. Now lift the backrest up
and remove it.
6.3.
Further preparations
!
Fold down the footrest.
!
Put the seat upholstery on the seat. Fix the upholstery on the seat metal plate using the
velcro fastener.
!
Screw the joystick module to the intended holder at the armrest.
!
Plug in the control cable behind the joystick module.
!
Check that the free wheel device is clicked shut and the motor brakes function. (For more
information about that subject consult sector 14)
!
Ensure that the main fuse below the battery cover is put on.
7.
First adjustments
7.1.
Seat depth
The seat depth has to be adjusted to the length of the upper legs. Precise adjustment is very
important considering a perfect sitting and standing position. Let a specialist adjust your seat
depth according to the measurements indicated on the order form.
For an individual adjustment of the seat depth it is necessary to change four components:
1. Seat support plate
2. Both seat supports
3. Adjusting lever on the right hand side
4. Adjusting lever on the left hand side
Is the LEVO
combi
equipped with the option reclining backrest, it is also necessary to adapt
the adjustable plates of the actuator for backrest reclining.
(See picture 4, B)
16