almost complete standing position on ground showing a wide downtilt. Increases the
downtilt to 3 degrees (only at downhill rides), it will be impossible to continue to drive in
the complete or almost complete standing position. To drive on lower the seat,
respectively reduce the standing angle.
!
Before standing up it is absolutely vital that the knee support and chest strap are fitted
correctly (see section 8) and the two backrest locking pins are properly located. Always
check these pins so they are fully in place each time you use the wheelchair.
!
Important:
Check if the quick release axles are fitted correctly into the leg rest tubes and
so the footplate is fixed securely at the leg rest pieces.
!
The following symbols are to be found on the wheelchair:
Warning, risk of pinching! Make sure no parts of the body, clothing or other
items get jammed.
Warning, read user’s manual!
Caution:
Federal law restricts this device to sale by or on the order of a medical professional
licensed by the law of the State in which he /she practices.
You should under no circumstances attempt to stand up without following all safety
precautions.
6.
Preparing the wheelchair for use and operation
A specialist should be responsible for first adjustments and he should get the chair ready for
operation.
!
Please make sure that all components listed are delivered with the chair. Check the list
shown in sector 3.2.
6.1.
LEVO combi standard backrest
Information about the assembly of the LEVO
combi
standard backrest is printed under the
sector 7.6. The standard backrest is not developed for quick fitting and removing.
15
