IES-0880 User Manual
Page 80
Port
Configuration, Port Status, Rate Control, RMON Statistics, Per Port Vlan
Activities
Configuration
Admin Setting:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if )#
2.
Usage:
Use the
shutdown
command to shut down the selected interface.
Use the
no shutdown
to disable this function.
3.
Command Syntax:
(no) shutdown
4.
Example:
The following example shows the use of the
shutdown
command to shut down the
interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if )#shutdown
switch_a(config-if )#
Duplex:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if )#
2.
Usage:
Use
duplex
command to specify the duplex mode to be used for each interface.
Use the
no duplex
to disable this function.
3.
Command Syntax:
(no) duplex MODE
