8
1.
Introduction
1-1. Overview
FGP-1072, a 8FE PoE + 2GE Combo SFP L2 Managed Switch, 8
10/100Mbps TP + 2 Gigabit dual media ports with TP/(100/1000M) SFP, is a
standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet and Ethernet
specifications. The switch can be managed through RS-232 serial port via directly
connection, or through Ethernet port using Telnet or Web-based management unit,
associated with SNMP agent. With the SNMP agent, the network administrator can
logon the switch to monitor, configure and control each port’s activity in a friendly
way. The overall network management is enhanced and the network efficiency is
also improved to accommodate high bandwidth applications. In addition, the switch
features comprehensive and useful function such as DHCP Option 82, QoS (Quality
of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security,
SNMP/RMON and IGMP Snooping capability via the intelligent software. It is
suitable for both metro-LAN and office application.
Others the switch supports the Power saving for reduce the power
consumption. The device also support DHCP Relay function The DHCP Relay
Agent makes it possible for DHCP broadcast messages to be sent over routers that
do not support forwarding of these types of messages. The DHCP Relay Agent is
therefore the routing protocol that enables DHCP clients to obtain IP addresses
from a DHCP server on a remote subnet, or which is not located on the local subnet.
This switch also complies with IEEE 802.3af, its advanced auto-sensing
algorithm enables providing power devices (PD) discovery, classification, current
limit, and other necessary functions. It also supports high safety with short circuit
protection and power-out auto-detection to PD.
The switch also supports the IEEE Standard
─ ─
802.1ab
(
Link Layer
Discovery Protocol
),
Provide more easy debug tool and enhance the networking
management availability, Others it can provide auto-discovery device and topology
providing.
•
Model Description
Model
Port 9, 10 Configurations
FGP-1072
Two types of media--TP and (100/1000M)
SFP Fiber
10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE
802.3/u/x/z Gigabit, Fast Ethernet specifications. 1000Mbps SFP Fiber transceiver
is a Gigabit Ethernet port that fully complies with all IEEE 802.3z and 1000Base-
SX/LX standards.
For upgrading firmware, please refer to the Section 3-21 or Section 4-2-2 for
more details. The switch will not stop operating while upgrading firmware and after
that, the configuration keeps unchanged.
Summary of Contents for FGP-1072
