24
•
•
•
•
Set IP Address, Subnet Mask and Default Gateway IP Address
Please refer to Fig. 2-7 CLI Management for details. They are default setting
of IP address. You can first either configure your PC IP address or change IP
address of the switch, next to change the IP address of default gateway and subnet
mask.
For example, your network address is 10.1.1.0, and subnet mask is
255.255.255.0. You can change the switch’s default IP address 192.168.1.1 to
10.1.1.1 and set the subnet mask to be 255.255.255.0. Then, choose your default
gateway, maybe it is 10.1.1.254.
Default Value
FGP-1072
Your Network Setting
IP Address
192.168.1.1
10.1.1.1
Subnet
255.255.255.0
255.255.255.0
Default Gateway
192.168.1.254
10.1.1.254
Table 2-3
After completing these settings in the switch, it will reboot to have the
configuration taken effect. After this step, you can operate the management through
the network, no matter it is from a web browser or Network Management System
(NMS).
Managed Switch – FGP-1072
Login: admin
Password:
FGP-1072#
Fig. 2-8 the Login Screen for CLI
Summary of Contents for FGP-1072
