150
Parameter description:
Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication
Failure, User login, User logout
STP: STP Topology Changed, STP Disabled, STP Enabled
LACP: LACP Disabled, LACP Enabled, LACP Member Added,
LACP Port Failure
GVRP: GVRP Disabled, GVRP Enabled
VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled
Module Swap: Module Inserted, Module Removed, Dual Media Swapped
Function name:
Email Configuration
Function description:
Alarm configuration is used to configure the persons who should receive the
alarm message via either email, or both. It depends on your settings. An email
address or a mobile phone number has to be set in the web page of alarm
configuration (See Fig 3-71). Then, user can read the trap information from the
email. This function provides 6 email addresses at most. The 21 different trap
events will be sent out to SNMP Manager when trap event occurs. After ticking
trap events, you can fill in your desired email addresses and mobile phone
numbers. Then, please click <Apply> button to complete the alarm. It will take
effect in a few seconds.
Fig. 3-71
Summary of Contents for FGP-1072
