225
diag
Syntax:
diag
Description:
Diag is used to test whether EEPROM, UART, DRAM and Flash is normal or not.
Argument:
None.
Possible value:
None.
Example:
FGP-1072 (diag)# diag
EEPROM Test : OK
UART Test : OK
DRAM Test : OK
Flash Test : OK
Loopback
Syntax:
loopback
Description:
For Internal/External Loopback Test.
Argument:
None.
Possible value:
None.
Example:
FGP-1072(diag)# loopback
Internal Loopback Test : OK
External Loopback Test : Port 2 3 4 6 8 9 10 Fail
FGP-1072(diag)#
ping
Syntax:
ping <ip>
Description:
To confirm that whether the remote end-station or switch itself is alive or not.
Argument:
<ip> : IP address or domain name
Possible value:
IP address, e.g. 192.168.1.65 or domain name, e.g. tw.yahoo.com
Example:
FGP-1072(diag)# ping 192.168.1.22
Gateway : 192.168.1.254
192.168.1.22 is alive.
Summary of Contents for FGP-1072
